發表論文：
[1]. Zhao, Yu, Rui Yao, Liliang Ouyang, Hongxu Ding, Ting Zhang, Kaitai Zhang, Shujun Cheng, and Wei Sun. "Three-dimensional printing of Hela cells for cervical tumor model in vitro." Biofabrication 6, no. 3 (2014): 035001.
[2]. Ouyang, Liliang, Rui Yao, Shuangshuang Mao, Xi Chen, Jie Na, and Wei Sun. "Three-dimensional bioprinting of embryonic stem cells directs highly uniform embryoid body formation." Biofabrication 7, no. 4 (2015): 044101.
[3]. Shor, L., Guceri, S., Wen, X., Gandhi, M. and Sun, W., “Fabrication and Cell-matrix Interaction Study on 3D Polycaprolactone/Hydroxypatite Tissue Scaffold” , Biomaterials, 2007, 28 (35), 5291-5297. (組織工程支架)
[4]. Lai Y, Cao H, Wang X, et al. Porous composite scaffold incorporating osteogenic phytomolecule icariin for promoting skeletal regeneration in challenging osteonecrotic bone in rabbits[J]. Biomaterials, 2018, 153:1. (骨組織工程支架)
[5]. Jessica Snyder, Ae Rin Son, Qudus Hamid, Chengyang Wang, Yigong Lui, Wei Sun, Mesenchymal stem cell printing and process regulated cell properties, Biofabrication, 7 (2015) 044106. (間充質干細胞)
[6]. Hamid, Q., Wang, C., Snyder J., Williams, S., Liu, Y. and Sun, W., “Maskless Fabrication of Cell-laden Microfluidic Chips with localized Surface Functionalization for the Co-culture of Cancer Cells”, Biofabrication, 7 (2015) 015012. (細胞芯片打印)
[7]. Chang, R., Emami, K., Wu, H. and Sun, W., “Biofabrication of a Three-Dimensional Liver Micro-Organ as an In Vitro Drug Metabolism Model”, Biofabrication, 2010, Vol.2. (微肝組織藥物模型)
[8]. Quyang, Liliang, Christopher B. Highley, Wei Sun, and Jason A. Burdick. “A Generalizable Strategy for the 3D Bioprinting of Hydrogels from Nonviscous Photo-Crosslinkable Inks.” Advanced Materials 29, no. 8 (2017).
[9]. Wu, Zhengjie, Xin Su, Yuanyuan Xu, Bin Kong, Wei Sun, and Shengli Mi. “Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation.” Scientific reports 6 (2016): 24474.
[10]. Mi, Shengli, Zhichang Du, Yuanyuan Xu, Zhengjie Wu, Xiang Qian, Min Zhang, and Wei Sun. “Microfluidic co-culture system for cancer migratory analysis and anti-metastatic drugs screening.” Scientific reports 6 (2016): 35544.
[11]. Ye, Kaiming; Kaplan, David; Bao, Gang; Bettinger, Christopher; Forgacs, Gabor; Dong, Cheng; Khademhosseini, Ali; Ke, Yonggang; Leong, Kam; Sambanis, Athanassios; Sun, Wei; Yin, Peng; "Advanced Cell and Tissue Biomanufacturing", ACS Biomaterials Science & Engineering (in press)
[12]. Mi, Shengli, Du, Zhichang, Yi, Xiaomang, Xu, Yuanyuan and Sun, Wei, “Biomimetic microfluidic system for modelling 3D tumour invasion into surrounding stroma and drug screening”, Biofabrication (in press)
[13]. Ouyang, L, Burdick, J.A and Sun, Wei, “Facile biofabrication of heterogeneous multilayer tubular hydrogels by fast diffusion-induced gelation”, ACS Applied Materials & Interfaces (in press)
[14]. Li, Y., Yao, R. Jiang, X.L., Li, L., Chen, ZN., Gao, G. and Sun, Wei, “3D Printing human induced pluripotent stem cells with novel hydroxypropyl chitin bioink: Scalable expansion and uniform aggregation”, Biofabrication (in press)
[15]. Zhengjie Wu, Bin Kong, Rui Liu, Wei Sun, Shengli Mi , “Engineering of corneal tissue through an aligned PVA/Collagen composite nanofibrous electrospun scaffold”, Nanomaterials (in press)
[16]. Mi, Shengli, Yi, Xiaomang, Du, Zhichang, Xu, Yuanyuan and Sun, Wei, “Construction of a liver sinusoid based on the laminar flow on chip and self-assembly of endothelial cells”, Biofabrication, 10(2), 2018, Doi: 025010
[17]. Kong, Bin, Sun, Wei, Chen, Guoshi, Tang, Song, Li, Ming and Mi, Shengli, “Tissue-engineered cornea constructed with compressed collagen and laser- perforated electrospun mat”, Scientific Reports, Apr 20;7(1):970
[18]. Li, Y., Yao, R. and Sun, W., "Engineering-derived approaches for iPSC preparation, expansion, differentiation and applications", Biofabrication 9 (2017) 032001
[19]. Zhang, Ting, Zhang, Hefeng, Zhang Laquan, Jia, Shuaijun, Liu, Jian, Xiong, Zhuo and Sun, Wei “Biomimetic design and fabrication of multilayered osteochondral scaffolds by low-temperature deposition manufacturing and thermal-induced phase-separation techniques”, Biofabrication 9 (2017) 025021
[20]. Xu, Y., Wu, X., Guo, X., Kong, B., Zhang, M., Qian, X., Mi, S. and Sun, W., "The Boom in 3D-printed Sensor Technology", Sensors 2017, 17, 1166; doi:10.3390/s17051166
[21]. Zhao, L., Chang Y., Yao, R., Lin, F. and Sun, W., “Modeling on Micro-droplet Formation for Cell Printing Based on Alternating Viscous-Inertial Force Jetting”, Journal of Manufacturing Science and Engineering, 2017, Vol. 139 / 011005-1 [DOI: 10.1115/1.4032768].
[22]. Ouyang L, Highley CB, Sun W, Burdick JA, A Generalizable Strategy for the 3D Printing of Hydrogels from Non-viscous Photocrosslinkable Inks, Advanced Materials, 2017, DOI: 10.1002/adma.201604983
[23]. Ouyang, Liliang; Yao, Rui; Zhao, Yu; Sun, Wei, “Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells" Biofabrication 2016; 8(3): 035020: doi: 10.1088/1758-5090/8/3/035020
[24]. Yao, R, Xu, G, Mao, S. S, Yang, H. Y, Sang, X. T, Sun, W, Mao, Y. L. Three-dimensional printing: review of application in medicine and hepatic surgery. Cancer Biology & Medicine (2016) 13(4): 443-451.
[25]. Ali, Jamel, UK Cheang, Liu, Y., Kim, H., Rogowski, L., Sheckman, S, Patel, P., Sun, W. and Kim, MJ, “Fabrication and magnetic control of alginate-based rolling microrobots”, AIP Advances, 125205 (2016); doi: 10.1063/1.4971277;
[26]. Jia, S., Zhang, T., Pan, W., Liu, J., Xiong, Z. and Sun, W., “In vivo Evaluation of a Novel Oriented Scaffold- BMSC Construct for Enhancing Full-thickness Articular Cartilage Repair in a Rabbit Model”, PLOS ONE, | DOI:10.1371/journal.pone.0145667 December 22, 2015
[27]. Ouyang, Liliang; Highley, Christopher; Rodell, Christopher; Sun, Wei; Burdick, Jason, "3D Printing of shear-thinning hyaluronic acid hydrogels with secondary crosslinking" ACS Biomaterials Science & Eng, 2016,2(10):1743-51; DOI: 10.1021/acsbiomaterials.6b00158
[28]. Liu, Y., Hamid, Q., Synder, J., Wang, CY and Sun. W., “Evaluating fabrication feasibility and biomedical application potential of in situ 3D printing technology”, Rapid Prototyping Journal, 2016, Volume 22 Issue 6, pp. 947-955
[29]. Mi, Shengli, Du, Zhichang, Xu, Yuanyuan, Wu, Zhengjie, Qian, Xiang, Zhang, Min, and Sun, Wei, “Microfluidic co-culture system for cancer migratory analysis and anti-metastatic drugs screening at different cell proportions”, Scientific Reports, 2016， | 6:35544 | DOI: 10.1038/srep35544)
[30]. Wu, Z., Su, X., Xu, Y., Kong, B., Sun, W. and Mi, S., “Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation. Scientific Reports, 2016 | 6:24474 | DOI: 10.1038/srep24474
[31]. Snyder JE, Son AR, Hamid Q, Sun W. Hetero-cellular Prototyping by Synchronized Multi Material Bioprinting for Rotary Cell Culture. Biofabrication 8 (2016) 015002
[32]. Snyder, J., Son, AR., Hamid, Q. and Sun, W., “Fabrication of Microfluidic Manifold by Precision Extrusion Deposition and Replica Molding for Cell laden Device”, ASME Transaction: Journal of Manufacturing Science and Engineering, April 2016, Vol. 138 / 041007.
[33]. Shengli Mi, Bin Kong, Zhengjie Wu, Wei Sun, Yuanyuan Xu, Xin Su. “A novel electrospinning setup for the fabrication of thickness controllable 3D scaffolds with an ordered nanofibrous structure”, Materials Letters, 2015, 160:343-346.
[34]. Snyder JE, Son AR, Hamid Q, Sun W. Mesenchymal Stem Cell Printing: “Survivability and Possible Phenotype Reprogramming”, Biofabrication 7 (2015) 044106.
[35]. Zhao, Y., Li, Y., Mao, SS, Sun, W. and Yao, R., “The influence of printing parameters on cell survival rate and printability in microextrusion-based 3D cell printing technology", Biofabrication 7 (2015) 045002.
[36]. Ouyang, L., Yao, R., Mao, SS., Chen, X., Na, J. and Sun, W., “Three-dimensional bioprinting of embryonic stem cells directs highly uniform embryoid body formation”, Biofabrication, 7 (2015) 044101.
[37]. Wang, CY, Hamid, Q., Snyder, J., Ayan, H. and Sun, W., “Localized surface functionalization of polycaprolactone with atmospheric-pressure micro-plasma jet”, Biomedical Physics and Engineering Express, (2015) 025002, doi:10.1088/2057-1976/1/2/025002
[38]. Zhao, L., Chang Y., Yao, R., Lin, F. and Sun, W., “Alternating Force Based Drop-on-demand Micro-droplet Formation and 3D Deposition”, Journal of Manufacturing Science and Engineering, 2015;137(3):031009-031009-9. doi:10.1115/1.4029803.
[39]. Ouyang, L., Yao, R., Chen, X., Na, J. and Sun, W., “3D printing of HEK 293FT cell-laden hydrogel into macroporous constructs with high cell viability and normal biological functions”, Biofabrication, 7 (2015) 015010；doi:10.1088/1758-5090/7/1/015010.
[40]. Hamid, Q., Wang, C., Snyder J., Williams, S., Liu, Y. and Sun, W., “Maskless Fabrication of Cell-laden Microfluidic Chips with localized Surface Functionalization for the Co-culture of Cancer Cells”, Biofabrication, 7 (2015) 015012; doi:10.1088/1758-5090/7/1/015012
[41]. Hamid, Q., Wang, C., Zhao, Y. Snyder J. and Sun, W., “Fabrication of Biological Microfluidics using a Digital Microfabrication System”, Journal of Manufacturing Science and Engineering, 136(6), 061001 (Oct 24, 2014), doi:10.1115/1.4028419
[42]. Zhao, H., Li, X., Zhao, S., Zeng, Y., Zhao, L., Ding, H., Sun, W. and Du, Y., “Microengineered in vitro Model of Cardiac Fibrosis through Modulating Myofibroblast Mechanotransduction”, Biofabrication 6 (2014) 045009, doi:10.1088/1758-5082/6/4/045009.
[43]. Liu, C., Li Y., Zhang L., Mi, S., Xu, Y. and Sun, W., “Development of a novel low temperature deposition machine using screw extrusion to fabricate PLGA scaffolds. Proceedings of IMechE, Part H: Journal of Engineering in Medicine”, 2014, Vol. 228(6) 593–606.
[44]. Zhao, Y., Rui, Y., Ouyang, L., Ding, H., Zhang, T., Zhang, K., Cheng, S. and Sun, W. “Three-dimensional printing of Hela cells for cervical tumor model in vitro”, Biofabrication, 6(3), 2014, doi:10.1088/1758-5082/6/3/035001.
[45]. Wang, C., Tang, Z., Zhao Y., Yao, R., Li, L. and Sun, W., “Three-dimensional in vitro Cancer Models: A Short Review”, Biofabrication, 6(2), 2014, doi:10.1088/1758-5082/6/2/022001.
[46]. Hamid, Q., Wang, C., Zhao, Y., Snyder, J. and Sun, W., “A three-dimensional cell-laden microfluidic chip for in vitro drug metabolism detection”, Biofabrication, 6(2), 2014, doi:10.1088/1758-5082/6/2/025008.
[47]. Snyder, J., Hunger, P., Wang, CY., Hamid, Q., Wegst, U. and Sun, W., “Combined Multi-Nozzle Deposition and Freeze Casting Process to Superimpose Two Porous Networks for Hierarchical 3-Dimensional Microenvironment”, Biofabrication, 6(1), 2014, doi:10.1088/1758-5082/6/1/015007.
[48]. Zhang, T., Jin, L., Fang, Y., Lin, F., Sun, W. and Xiong, Z., “Fabrication of Biomimetic Scaffolds with Oriented Porous Morphology for Cardiac Tissue Engineering”, Journal of Biomaterials and Tissue Engineering, Vol. 4, 2014, 1–10.
[49]. Hamid, Q., Wang, C., Snyder, J., and Sun, W., “Surface modification of SU-8 for enhanced cell attachment and proliferation within microfluidic chips,” Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2014, 103, 473–484, doi:10.1002/jbm.b.33223.
[50]. Ringeisen, B., Pirlo, R., Wu, P., Boland, T., Huang, Y., Sun, W., Hamid, Q. and Chrisey, D., “Cell and organ printing turns 15: Diverse research to commercial transitions”, MRS Bulletin, 2013, 38, 834-843.
[51]. Li, Y., Zhang, L., Liu, C., Zhao, Y. and Sun, W., “A Novel Three-dimensional Direct Controlled Cell Assembling System”, Advanced Materials Research, 2013, Vols. 652-654, 2079-2085.
[52]. Zhang, T., Ouyang, L., Chang, K., and Sun, W., “Mechanical Property Characterization of Bioprinted in vitro Soft Tissue Model”, Biofabrication, 5(4), 2013, doi:10.1088/1758-5082/5/4/045010.
[53]. Hamid Q, Wang C, Snyder JE, Sun W. Digital microfabrication of tissue arrays for pharmaceutical investigations. Journal of Tissue Engineering and Regenerative Medicine 2012; 6:347-347
[54]. Rodriguez-Devora, J. Ambure, S., Shi, ZD, Yuan, Y., Sun, W. and Xu, T. “Physically facilitating drug-delivery systems”, Therapeutic Delivery, 2012, 3(1), 1-15.
[55]. Ayan, H., Yildirim, E., Pappas, D., and Sun, W., “Development of a cold atmospheric pressure microplasma jet for freeform cell printing”, Applied Physics Letters; 99, 2011, 111502; 1-3.
[56]. Yildirim, E., Pappas, D., Gü?eri, S. and Sun, W., “Enhanced cellular functions on polycaprolactone tissue scaffolds by O2 plasma surface modification”, Plasma Processing Polymers; 2011, 8; DOI: 10.1002; 1-8.
[57]. Snyder, J., Hamid, Q., Wang, W., Chang, R., Emami, K., Wu, H. and Sun, S., “Bioprinting cell-laden matrigel for radioprotection study of liver by pro-drug conversion in dual tissue microfluidic chip”, Biofabrication, 2011, Vol. 3, doi:10.1088/1758-5082/3/3/034112: 1-9. \
[58]. Hamid, Q., Snyder, J., Wang, C., Timmer, M., Hammer, J., Guceri, S. and Sun, W., “Fabrication of three-dimensional scaffolds using the precision extrusion deposition with an assisted cooling”, Biofabrication, 2011, Vol. 3, doi:10.1088/1758-5082/3/3/034109: 1-11.
[59]. Huang, G., Zhou, L., Zhang, Q., Chen, Y., Sun, W., Xu, F. and Lu, T., “Microfluidic hydrogels for tissue engineering”, Biofabrication 2011, Vol. 3, doi:10.1088/1758-5082/3/1/012001: 1-13.
[60]. Chang, R., Emami, K., Wu, H. and Sun, W., “Biofabrication of a Three-Dimensional Liver Micro-Organ as an In Vitro Drug Metabolism Model”, Biofabrication, 2010, Vol. 2, doi:10.1088/1758-5082/2/4/045004: 1-11.
[61]. Buyukhatipoglu K., Chang R., Sun W., Morss Clyne A., “Bioprinted Nanoparticles for Tissue Engineering Applications”, Tissue Engineering Part C: Methods. August 2010, 16(4): 631-642.
[62]. Yan, K., Nair, K. and Sun, W., “Three Dimensional Multi-Scale Modeling and Analysis of Cell Damage in Encapsulated Alginate Scaffolds”, Journal of Biomechanics, 2010, Volume 43, Issue 6, 1031-1038.
[63]. Yildirim, E., Besunder, R., Pappas, D., Allen, F., Gü?eri S., and Sun, W., “Accelerated differentiation of osteoblast cells on polycaprolactane scaffolds driven by combinatorial effect of protein coating and plasma modification”, Biofabrication, 2010, 2(1), doi:10.1088/1758-5082/2/1/014109: 1-12.
[64]. Buyukhatipoglu, K., Jo, W., Sun, W., Morss-Clyne, A., “The Role of Printing Parameters and Scaffold Biopolymer Properties in the Efficacy of a New Hybrid Nano-bioprinting System”, Biofabrication, 2009, 1(3), doi:10.1088/1758-5082/1/3/035003: 1-9.
[65]. Khalil, S and Sun, W., “Bioprinting of Endothelial Cells with Alginate for 3D Tissue Constructs”, ASME Transactions, J. of Biomedical Engineering, 2009, 13(11), July, 1-13.
[66]. Nair, K., Gandhi, M., Khalil, S., Yan, K., Marcolongo, M., Barbee, K. and Sun, W., “Characterization of cell viability during bioprinting process”, Biotechnology Journal, 2009, Vol. 4 (8), 1168-1177.
[67]. Shor, L., Chang, R., Gü?eri, S., Gondon, J., Kang, Q., Hartsock, L., An, Y. And Sun, W., “Precision Extruding Deposition (PED) Fabrication of Polycaprolactone (PCL) Scaffolds for Bone Tissue Engineering”, Biofabrication, 2009, 1(1), doi:10.1088/1758-5082/1/1/015003: 1-10.
[68]. Yildirim, E., Besunder, R., Allen, F., Gü?eri S., and Sun, W., “Fabrication and Plasma Treatment of 3D Polycaprolactane Tissue Scaffolds for Enhanced Cellular Function”, 2008, J. of Virtual and Physical Prototyping, Vol. 3 (4), 199 - 207.
[69]. Yildirim, E., Yin, X., Nair, K. and Sun, W., “Preliminary study on fabrication, characterization and endothelial cell cytocompatibility study of alginate/single-walled carbon nanotube tissue scaffolds”, Journal of Biomedical Materials Research: Part B - Applied Biomaterials, 2008, 87B, 406-414.
[70]. Vondran, J., Sun, W. and Schauer, C., “Electrospanning Cross-linked, Electrospun Chitosan-PEO Nanofiber Mats”, Journal of Applied Polymer Science, 2008, 109(2), 968-975.
[71]. Chang, R., Nam, J. and Sun, W., “Computer-Aided Design, Modeling, and Freeform Fabrication of 3D Tissue Constructs for Drug Metabolism Studies”, Computer-Aided Design and Application, 2008, Vol. 5, p. 21-29.
[72]. Chang, R., Nam, J. and Sun, W., “Direct Cell Writing of 3D Micro-organ for In Vitro Pharmacokinetic Model”, Tissue Engineering, 2008, 14(2), 157-169.
[73]. Nair, K., Yan, K. and Sun, W., “A computational modeling approach for the characterization of mechanical properties of 3D alginate tissue scaffolds”, Journal of Applied Biomaterials and Biomechanics, 2008, 6: 35 – 46.
[74]. Shor, L., Guceri, S. Wen, X., Gandhi, M. and Sun, W., “Solid Freeform Fabrication of Polycaprolactone/Hydroxyapatite Tissue scaffolds”, Trans ASME: Journal of Manufacturing Science and Engineering, 2008, Vol. 130, 021018-1 to 021018-6..
[75]. Chang, R., Nam, J. and Sun, W., “Effects of Dispensing Pressure and Nozzle Diameter on Cell Survival from Solid Freeform Fabrication-based Direct Cell Writing”, Tissue Engineering, 2008, 14(1): 41-48.
[76]. Yildirim, E., Ayan, H., Vasilets, V., Fridman, A., Guceri, S. and Sun, W., “Effect of Dielectric Barrier Discharge Plasma on the Attachment and Proliferation of Osteoblasts Cultured over Poly (epsilon-Caprolactone) Scaffolds”, Plasma Processes & Polymers, 2008, 5(1): 58-66.
[77]. Shor, L., Guceri, S., Wen, X., Gandhi, M. and Sun, W., “Fabrication and Cell-matrix Interaction Study on 3D Polycaprolactone/Hydroxypatite Tissue Scaffolds”, Biomaterials, 2007, 28(35), 5291-5297.
[78]. Nair, K, Yan, K. and Sun, W., “A Multi-Level Numerical Model for Quantifying Cell Deformation in Encapsulated Alginate Structures”, J. of Mechanics of Materials and Structures, 2007, 2(6), 1121-1142..
[79]. Li, J., Regli, W. and Sun, W., “An Approach to Integrating Shape and Biomedical Attributes in Vascular Models”, Computer-Aided Design, 2007, 39(7), 598-609.
[80]. Starly, B., Yildirim, E. and Sun, W., “A Tracer Metric Numerical Model for Predicting Tortuosity Factors in 3D Porous Tissue Scaffolds”, Computer Methods and Programs in Biomedicine, 2007, 87, 21-27.
[81]. Gomez, C., Shokoufandeh, A. and Sun, W., “Unit-Cell Based Design and Modeling in Tissue Engineering Applications”, Computer-Aided Design and Application, 2007, Vol. 4(5), 649-657.
[82]. Starly, B. and Sun, W., “Internal Scaffold Architecture Designs using Lindenmayer Systems”, J. of Computer-Aided Design and Application, 2007, Vol. 4, 395-403.
[83]. Nam, J, Starly, B. and Sun, W., “Computer-Aided Tissue Engineering: Design by Chip”, J. of the Biochemist, 2007, 29(1), 20-23.
[84]. Khalil, S. and Sun, W., “Biopolymer Deposition for Freeform Fabrication of Hydrogel Tissue Constructs”, J. of Materials Science and Engineering C, 2007, 27(3): 469-478.
[85]. Tseng, J. and Sun, W., “Dynamic Response of Cantilevered Rail Guns Attributed to Projectile/Gun Interaction – Theory”, IEEE Transactions on Magnetic, 2007, 43(1), 207-213.
[86]. Darling, A. and Sun, W., “Orthotic design through 3D reconstruction: a passive assistance ankle foot orthotic”, J. of Applied Bonic and Biomechanics, 2006, 3(2), 93-99.
[87]. Piatt, J., Starly, B., Faerber, E. and Sun, W., “Application of Computer-Aided Design Methods in Craniofacial Reconstructive Surgery Using a Commercial Image-Guidance System”, J. of Neurosurgery, 2006, 104(1 Suppl), 64-67.
